You are using an older browser version. Please use a supported version for the best MSN experience.

Investigators reveal cause of Leicester helicopter crash

Sky News logo Sky News 07-12-2018
A helicopter belonging to the Leicester City chairman crashed shortly after takeoff © Sky News Screen Grab A helicopter belonging to the Leicester City chairman crashed shortly after takeoff

The helicopter crash which killed the chairman of Leicester City and four other people was caused by a pin which had come loose in the tail rotor control mechanism, a report has revealed.

The Air Accidents Investigation Branch found that the pin had become disconnected, resulting in the helicopter becoming unstable and preventing the pilot from controlling it.

Leicester City owner Vichai Srivaddhanaprabha arrives at the King Power Stadium in a helicopter in 2016 © Getty Leicester City owner Vichai Srivaddhanaprabha arrives at the King Power Stadium in a helicopter in 2016

Leicester City chairman Vichai Srivaddhanaprabha, two of his staff Nursara Suknamai and Kaveporn Punpare, pilot Eric Swaffer and Mr Swaffer's girlfriend Izabela Roza Lechowicz were killed when the aircraft crashed into a car park close to the King Power stadium on 27 October.

a man standing in front of a crowd: Leicester chairman Vichai Srivaddhanaprabha was among five people killed in the crash © Getty Leicester chairman Vichai Srivaddhanaprabha was among five people killed in the crash

Investigators found the pilot's pedals became disconnected from the tail rotor and caused the aircraft to make an uncontrollable right turn before it spun and fell, hitting the ground in a ball of flames.

The pedals and tail rotor are linked by a mechanism which failed after parts of it had become disconnected and there was a "build-up of black grease" on one component.

a couple of people posing for a photo: Victims clockwise from top left: Eric Swaffer, Izabela Roza Lechowicz, Kaveporn Punpare and Nursara Suknamai © Other Victims clockwise from top left: Eric Swaffer, Izabela Roza Lechowicz, Kaveporn Punpare and Nursara Suknamai

The failure led to the pitch of the tail rotor blades being changed "until they reached the physical limit of their travel", investigators said.

The report stated: "The initiating cause and exact sequence of the failure that resulted in the loss of tail rotor control is being investigated as a priority."

Now get the stories that matter delivered to you! Save our number and send "Hi" to +919971254657 to join the MSN WhatsApp alerts service today.

a close up of a map © Other The report said: "The tail rotor actuator control shaft became disconnected from the actuator lever mechanism.

"The disconnection stopped the feedback mechanism for the tail rotor actuator from operating and the tail rotor actuator from responding to yaw control inputs."

This loss of the feedback mechanism meant the yaw stops were ineffective and the tail rotor actuator was able to continue changing the pitch of the tail rotor blades "until they reached the physical limit of their travel".

a screenshot of a video game © Other "This resulted in an uncontrollable right yaw."

It went on: "Sufficient force and torque had been applied to the castellated nut on the actuator end of the control shaft to friction weld it to the pin carrier and to shear the installed split pin.

a close up of an engine © Other "Whilst the shaft was rotating and a yaw control input was applied, the shaft 'unscrewed' from the nut, disconnecting the shaft from the actuator level mechanism, and causing the nut to become welded to the pin carrier."

In pics: Indonesia Lion Air plane crash

More from Sky News

image beaconimage beaconimage beacon