You are using an older browser version. Please use a supported version for the best MSN experience.

Deciphering Air Traffic Control Calls in Emergency Situations

The Points Guy logo The Points Guy 8/11/2019 J. Scott Clark
a group of people in a room © Provided by Bankrate, LLC

No matter if you’re a frequent business traveler or simply fly for vacation, most of us just want to get from point A to point B as smoothly as possible. But even the most experienced traveler has likely contemplated the “what ifs” of taking to the sky, including in-flight emergencies.

In-flight emergencies can range from medical issues on board with passengers to more serious events like a malfunction of the aircraft or issues with fuel. While these events are rare for the average passenger, in-flight events do happen.

During an in-flight emergency, airline flight crews and controllers on the ground have to be able to communicate effectively. At the heart of these interactions are two key Air Traffic Control (ATC) terms denoting the types of emergency situations in the air — one of urgency and one of distress — as designated by the FAA.

Here’s what they mean.

PAN-PAN-PAN

Flight crews indicate to controllers that they are in an urgent situation by the prefix “PAN-PAN-PAN” at the start of a radio transmission. In the case of Qantas flight 32 in 2010, the crew issued a PAN call after the loss of engine number two — the port side inboard engine — on the flight’s A380.

Issuing a PAN call over the radio lets both ATC and other aircraft in the area know that the crew has a problem and keeps radio transmissions to a minimum.

a small airplane sitting on the ground: A troubled Qantas Airbus A380 seen after an emergency landing at the Changi International airport in Singapore on Nov. 4, 2010. AFP PHOTO/ROSLAN RAHMAN © The Points Guy A troubled Qantas Airbus A380 seen after an emergency landing at the Changi International airport in Singapore on Nov. 4, 2010. AFP PHOTO/ROSLAN RAHMAN

In the case above, the Qantas crew was able to perform a control check to see which systems were degraded or unavailable and make plans for landing after issuing the PAN call. The plane flew for two hours after the number two engine suffered a catastrophic failure, causing damage to a number of flight controls, onboard systems and the number one engine as well. Because of damaged control linkages, emergency ground crews had to blast water and firefighting foam into the engine to get it to shut down. But, the important thing to remember is that even in this PAN situation, the crew was able to safely land the plane.

MAYDAY-MAYDAY-MAYDAY

A Mayday broadcast means that an emergency situation has moved beyond urgent and into one of distress. Pilots rarely put this out on the radio unless the situation is dire or uncontrollable. Emergency situations could include medical emergencies, fuel starvation, landing gear not extending properly or flight-control issues that make the aircraft unstable to fly.

In the United States, pilots may simply tell ATC that they are “declaring an emergency.” At that point, ATC will ask the nature of the emergency and clear airspace to get the aircraft on the ground as quickly as possible. Controllers will usually notify first responders like firefighters and EMTs as well so that everyone is ready when the plane makes it to the ground.

Bottom Line

It involves few words, but it’s good to know that flight crews and ground control have clear methods of communication and procedures when things go wrong in the air. Just remember if you find your self in an emergency situation onboard, try to stay calm, review the safety card in the seat back pocket, locate your nearest exit, and follow any and all instructions that the flight crew might have for you.

Related video: Certain United Airlines Flyers Will Get Free or Discounted CLEAR Memberships (Provided by Buzz60)

UP NEXT
UP NEXT
AdChoices
AdChoices

More fFrom The Points Guy

The Points Guy
The Points Guy
image beaconimage beaconimage beacon