You are using an older browser version. Please use a supported version for the best MSN experience.

Inside the Car Company That's Resurrecting the DeLorean

Popular Mechanics logo Popular Mechanics 1/18/2019 Matt Blitz
a close up of a car: DMC’s headquarters doubles as a restoration garage and storage for thousands of original three-decade-old DeLorean parts. Soon, it will become an assembly hall for the revamped DeLorean.© Heritage Images - Getty Images DMC’s headquarters doubles as a restoration garage and storage for thousands of original three-decade-old DeLorean parts. Soon, it will become an assembly hall for the revamped DeLorean.

The speedometer climbs as we race down a straightaway in Humble, Texas. As the needle edges to 60, 70, then 80 miles per hour, the 36-year-old automobile rattles and the wind whistles through the windows. Finally the DeLoreaon zooms up to 88 miles per hour and we feel, just for a moment, like we've gone back to the future.

Research

Then, a series of loud honks from the other side of the road, followed by animated waving, awaken us out of our speed spell. “We get that all the time," says DeLorean Motor Company CEO Stephen Wynne, sitting shotgun. “That doesn’t happen with any other car.”

After our speed reverie, we pull back into DMC’s Texas headquarters, located in this Houston suburb. It’s a wet November day and DeLoreans line the parking lot. “It’s the only lot in the country where you see this many DeLorean at any given time,” Wynne says.

The open garage door reveals cars in different stages of repair, some exposing their rear engine and others with their gull-wing doors open, steel birds ready to take flight. In all, three dozen DeLoreans are scattered in and out of Wynne’s DMC headquarters, all in the midst of being repaired and restored to their former glory.

The DeLorean DMC-12 is more than a movie prop or simple automobile; it’s a long, strange legacy wrapped in stainless steel. That legacy, buoyed by the ongoing love for the Back to the Future films, keeps the car in the public imagination, and gave Wynne the ammunition to pursue a plan that's much more ambitious than simply getting a 36-year-old car back on the road. He wants to build a brand new DeLorean, one created in the present using the roadmap of the past.

“I’m fiercely proud of DeLorean, but the car they put out could have been better,” says Wynne, “We’ve had thirty plus years of [research and development] and nine thousand prototypes that were made, all so I can make 300 really nice cars a year.”

Crash and Burn

a group of people standing in front of a building: The DeLorean factory line in Belfast, Ireland, November 1981.© Bill Pierce - Getty Images The DeLorean factory line in Belfast, Ireland, November 1981.

The infamous story of DeLorean Motor Company starts with John Z. DeLorean, the founder and company’s namesake. In the late 70s, DeLorean departs GM at the height of his powers to build “the new American sports car.” He gets $200 million in investment and production begins in 1981 in Belfast on the sleek, stainless steel, gull-wing DMC-12.

Cost overruns forces DeLorean to rush the car to market and sell it for more than double the initial asking price, which, along with concerned reviews, leads to selling only half of what he hoped. In February 1982, the company basically declares bankruptcy and DeLorean himself runs into legal trouble. What was once such a promising venture, DeLorean-the company, the car, and the man- hit rock bottom.

It wouldn’t be until three years later, when Doc Brown opens his conspicuous trailer at Twin Pines Mall, that the futuristic-looking automobile speeds off at 88 miles per hour and becomes a pop culture icon. But today’s DeLorean Motor Company, revived from the remains of the original with its founder’s blessing, has a much different story-and it starts with Wynne.

In 1980, Wynne, a Liverpool native, moved to the U.S., and after a stint on the East Coast, he went west to California where he opened a repair shop, exclusively working on English and French car brands like Lotus, Jaguar, Renault, and Peugeot.

a car parked in a parking lot: DeLoreans awaiting export at the Belfast plant, February 1982.© AFP Contributor - Getty Images DeLoreans awaiting export at the Belfast plant, February 1982.

But Wynne saw opportunity in DeLorean’s meteoric rise and fall. “Nobody wanted to work on DeLoreans, nobody knew how to work on the DeLoreans, and nobody was interested in learning how to work on DeLoreans,” says Wynne. Except for him. Wynne had a wealth of experience working on similar cars-after all, DeLorean’s pre-production and development was primarily done by Lotus, while the car’s engine and transmission were made by Renault. “It was basically a mix of the English and the French.” says Wynne, “Everything about the [car] was what I already knew.”

By 1983, the year after production of the DMC-12 had ceased, Wynne quit everything else and was working exclusively on DeLoreans. “When you have very little competition, you can do things the way you want,” says Wynne. He knew it was going to be a tremendous challenge. “Compared to what was around, it was an incredible looking car,” says Wynne, “But...there was no factory support and I was going to have to figure everything out. It was part business, part ego.”

By the mid-1990s, he fully went in on the car when he began acquiring the trademarks and IP around the name “DeLorean Motor Company.”

Putting the Parts Together

a sign on the side of a building: The DeLorean Motor Company in Humble, Texas.© Matt Blitz The DeLorean Motor Company in Humble, Texas.

In his Belfast factory in Ireland, DeLorean had stocked piled enough parts to build nearly 30,000 cars, but only ending up producing about 9,200. In November 1982, a company called Consolidated International bought DMC’s U.S. assets, including thousands of leftover parts, and stored them in facility in Columbus, Ohio.

a man standing in front of a car: Stephen Wynne, CEO of DeLorean Motor Company© Matt Blitz Stephen Wynne, CEO of DeLorean Motor Company

“It was a huge, huge inventory,” says Wynne, “It was stored in this [four-story] building that was built in the early 1900s and each story was 80,000 square feet.”

Wynne was buying parts from them all the time for his burgeoning DeLorean service business. Then in 1997, a decade and a half after DeLorean went bust, Wynne took a gamble. “I don’t know whether I was the only sucker or what, but I was able to put a deal together to acquire all the inventory,” says Wynne.

To accommodate his new stash of car parts, he built a warehouse and restoration center in Humble, Texas. It took 85 semi-truck loads to move the parts the 1,100 miles from Columbus, Ohio to the Houston suburb.

Right now, most of DMC headquarters is garage work space and storage for these 37-year-old car parts. There are meticulously-ordered giant racks holding thousands of original DeLorean components. There are gull-wing doors by the dozen, hubcaps by the hundreds, and bolts by the thousands. There are also windshields, headlights, cooling fans, seatbelts, side panels, floor mats, and every other piece that together composes a DeLorean.

“There’s 2650 parts that go to a DeLorean... and we have all the parts right here,” says Wynne. As we pass by stacks of engines with only 70 of those remaining in the stockpile. “I’m very cautious on how I sell them. I don’t waste engines.”

We pass by rows of tires, which Wynne says they rarely use. “These are [37]-year-old tires. They are originals and met standards then, but now... dry rot.” Currently, these parts are sold to fellow DeLorean owners or used in the more than hundred in-house restorations done every year across their four facilities in Texas, California, Florida, and Illinois. Those restorations cost on average $20,000 to $50,000, depending on the condition of the original.

Car parts aren’t the only thing Wynne obtained when he purchased after the fall of the DeLorean empire. He also got the entire archives, marketing files, and the original racks, crates, and boxes that the parts were stored and shipped in.

“Look at this,” says Wynne pointing to a sticker on a box of louvres, “this is from the company in Augsburg, West Germany. West Germany doesn’t even exist anymore. We don’t throw these boxes away. They are way too cool.”

But perhaps the most valuable thing Wynne obtained in the sale were the original specs, suppliers drawings, and blueprints of all 2,650 parts in a DeLorean. In other words, he’s got John Z. DeLorean’s brain on file.

“This is gold for us. We have notes on every part,” says Wynne, “So, although some of the suppliers are gone now, we can go out and get stuff reproduced...you can only do so many restorations and sell so many parts over the counter. The next thing to do is start making cars.”

When FAST means Slow

a car parked in a parking lot: Lineup of DeLoreans outside DMC© Matt Blitz Lineup of DeLoreans outside DMC

In December 2015, Congress passed the FAST Act which included a provision allowing for “low-volume manufacturers” to produce up to 325 turnkey replica cars a year that would not need to be subjected to today’s safety and production standards and could be built conforming to the production year’s requirements.

For a DeLorean, that’s 1981 at a time, for example, when airbags were not yet required. This was a massive victory for those wanting to own their replica Cobra, Morgan, or even 1955 Corvette. It was also a huge deal to builders like Wynne. The company immediately made plans to go back into production on the iconic automobile, looking to bring in ex-Lotus staff to help reengineer the car (just like the original) and swapping out the original 130 horsepower engine with a new, modern 300 to 400 horsepower one.

They had enough original parts to build 350 to 400 cars. For missing parts, they had all the schematics and drawings to reproduce new one. It was a nearly ideal situation. In the fall of 2016, DeLorean started accepting applications “from those with an interest in being placed on a reservation list” to purchase a car. “It was a pre-intent to intent to maybe buy a car,” chuckles Wynne. The list, according to Wynne, is now up to 5,000 people. Everyone was excited for a brand-new replica DeLorean.

Except, there was one problem.

Buried in the act, the provision says that the Department of Transportation, more specifically NHTSA, has 12 months to issue specific regulations and processes around how the low-volume manufacturers go about making these replicas. Three years later, this still hasn’t happened yet and it’s a source of extreme frustration.

“They basically need approve a one page document with a bunch of checkboxes on it. It’s like ‘come on.’” He doesn’t know the reasons for the hold-up, but speculates it’s due to 2016’s change of administration and that it took awhile for NHTSA to get a chief counsel and a director. And, of course, there’s now the weeks-long government shutdown.

While, in theory, DeLorean could go ahead and build cars anyway, they would only be able to be sold in Europe and Asia-not in the United States. “An American car from an American brand that can’t be sold in America,” says Wynne, “It’s horrible.”

Wynne isn’t alone. The Specialty Equipment Market Association (SEMA), of which DeLorean is a part of, is so upset by the missed deadline that they are threatening to sue. In a November press release, SEMA said the lengthy lack of action is hurting small businesses, consumers, and workers and were preparing to “challenge the agency in court if it fails to take immediate action to implement.”

When contacted about any further updates, SEMA wrote in a statement to Popular Mechanics that a lawsuit is “prepared but not yet filed...SEMA is in direct communications with the agency and believes publication of a proposed rule is imminent, to be followed by a final rule at some point in 2019.”

When contacted, NHTSA responded via email “At this time, due to shutdown, the agency cannot assist on this matter.”

This has put Wynne’s ambitious plans on hold for the moment, but not canceled. There’s optimism that this will be figured out early this year, and Wynne is moving forward in converting a large chunk of DMC’s storage space into an automobile assembly hall.

They’ve also set a modest plan of only producing 22 cars in the first year, whenever that is, before climbing to 50 in the second and, then, 100 in the third to see “how that fits” (which means, with enough original parts to build 400 cars, original parts should last at least to year five). He says that they can’t set a price yet on one of these new replicas due not knowing the exact materials that will be needed, but believes it will cross the $100,000 threshold.

Beyond these initial steps, though, Wynne is still waiting.

“It’s awful a lot of money. If we spend it and, the day we're finished, we can't take orders, we will go under.”

A Future Beyond Back to the Future

a car parked in the grass: Meet the Company That's Resurrecting the DeLorean© MediaNews Group/Orange County Register - Getty Images Meet the Company That's Resurrecting the DeLorean

So, what would have the car’s namesake think about a English mechanic reviving his iconic car out of a suburban Texas assembly hall? Prior to DeLorean’s death in 2005, Wynne says they had several “nice, causal” phone conversations about a variety of subjects. Even then, Wynne was considering the idea of bringing back the iconic automobile and mentioned it to DeLorean.

“He said he thought it was a really good idea and offered his assistance,” says Wynne. “He was very supportive.”

Wynne thinks DeLorean’s downfall was primarily tied to having a way too aggressive of a business plan. “They went from zero to production in 22 months,” says Wynne, “They rushed it.”

But where DeLorean’s main problem was not having enough time, Wynne has too much. “All I want to do is to [put] Deloreans on the road... I’m frustrated we can’t do that yet.”

AdChoices
AdChoices

More From Popular Mechanics

Popular Mechanics
Popular Mechanics
Loading...

image beaconimage beaconimage beacon